Electrical distribution board in a commercial building
Energy Solutions · Energy Monitoring

Measure the Energy Your Bills Cannot Explain

A utility bill shows the total. It does not show which circuits are driving the cost, what continues to run outside operating hours or whether an upgrade has delivered the result you expected. Energy Clamp Meters provide circuit-level visibility across fixed electrical loads, turning hidden consumption into evidence you can act on.

See What Each Circuit Is Costing You

Energy Clamp Meters are installed at the distribution board to measure the electricity flowing through selected circuits. Instead of seeing one figure for the whole building, you can separate the consumption of lighting, heating, ventilation, air conditioning, compressors and other fixed plant.

The result is a more useful view of where electricity is being consumed, when demand rises and where operating patterns may be creating avoidable cost.

Grid of ceiling lighting circuits in a commercial building

Circuit-level visibility

Monitor fixed loads that cannot be measured through a Smart Socket.

Time-based evidence

See how selected circuits behave during occupied hours, overnight, at weekends and through seasonal changes.

Decision-ready data

Translate measured consumption into energy, cost and emissions information for operational and investment decisions.

What Energy Clamp Meters Can Monitor

The right monitoring plan depends on the building and the decision you need to make. Typical applications include:

Lighting circuits

Measure lighting demand across a floor, building or selected area, including out-of-hours consumption.

Heating, ventilation and air conditioning

Understand the electrical demand of fans, pumps, air-conditioning systems and related plant.

Compressors and specialist equipment

Track high-load equipment where overall utility data cannot show individual operating patterns.

Fixed plant and distribution circuits

Monitor other selected fixed loads that sit outside the reach of plug-level monitoring.

Technical qualification

Single-phase and three-phase supplies can be monitored. The required meter and installation design are confirmed during survey. Installation is completed by a qualified electrician, and any need for an interruption to supply is confirmed for the specific site. The monitoring hardware reports to the dashboard over the site's network, and connectivity requirements are confirmed during survey.

Exposed ventilation ductwork and lighting runs in an open-plan office

Energy, Cost and Emissions in One Dashboard

The meter data feeds into a dashboard where consumption can be viewed over time and translated into cost and emissions information. This creates a common evidence base for estates, finance and sustainability teams.

  • Compare selected circuits, buildings or operating periods.

  • Identify unusual demand and avoidable out-of-hours use.

  • See when demand peaks and which loads coincide, so operating patterns can be adjusted where practical.

  • Support investment decisions with measured evidence rather than assumptions.

  • Track the result after a change has been made.

Reviewing circuit-level energy, cost and emissions data on a laptop

See the Peaks. Change the Pattern.

Monitoring is not only a reporting tool. Circuit-level data shows when demand peaks and which loads are running at the same time. Where operating patterns can be changed, for example by staggering high-demand activity or removing out-of-hours running, the same evidence supports smoother, lower demand and can reduce avoidable capacity-related costs, subject to the site's tariff and supply arrangements.

Measure Before, Verify After

Energy Clamp Meters can be used before, during and after an improvement project. A baseline shows how the circuit currently performs. Continued monitoring then shows whether the intervention changed consumption in the way the business case expected.

Occupied open-plan office where lighting and equipment loads are monitored

Before an upgrade

Establish the baseline, identify operating patterns and test the scale of the opportunity.

During delivery

Observe changes as equipment, controls or working practices are introduced.

After completion

Compare the new pattern with the baseline and assess the measured result.

Energy Clamp Meters, Smart Sockets and TrackZero

Each service answers a different question. They can be used independently or combined to build a more complete view of energy performance.

Energy Clamp Meters

Circuit-level visibility for lighting, HVAC, compressors, plant and other fixed electrical loads.

Smart Sockets

Appliance-level visibility and control for plug-in equipment.

TrackZero

Portfolio-level carbon reporting, action planning and progress tracking across one organisation or a wider estate.

Monitoring First, Control Where It Fits

Energy Clamp Meters measure consumption. They do not provide automated control on their own. Where control or optimisation is worth exploring, it is scoped separately against the system design and equipment already in place. It may require bespoke design, API integration and additional control hardware.

Monitoring can be deployed as a complete standalone project. You do not need to commit to automated control in order to gain useful evidence.

A Practical Four-Step Process

  1. 1

    Define the question

    Agree what you need to understand, which buildings or circuits matter and what decision the data must support.

  2. 2

    Survey and design

    Confirm the electrical arrangement, single-phase or three-phase requirements, meter locations and installation plan.

  3. 3

    Install and establish the baseline

    A qualified electrician completes the installation and the selected circuits begin reporting to the dashboard.

  4. 4

    Review and act

    Interpret the data, identify practical actions and continue monitoring to assess the result.

Start with the Circuit That Matters Most

You do not need to monitor everything at once. Start with the circuit, building or operating pattern that is hardest to explain, then expand the evidence where it adds value.