Public building entrance
Energy Certificates · Display Energy Certificates

Show How Your Public Building Actually Uses Energy

A Display Energy Certificate uses metered consumption to show how a public building has performed in operation. Unifi.id coordinates the assessment through an accredited assessor, helps estates manage renewals and connects the advisory report to a programme of measurable improvement.

We do not simply arrange a DEC. We help public-sector estates stay compliant, manage renewals and turn operational energy evidence into a programme of measurable improvement.

The Three Conditions That Make a DEC Apply

In England and Wales, a Display Energy Certificate and advisory report are required when all three of the following conditions apply to the building:

Occupied by a public authority

The building is occupied in whole or in part by a public authority.

Frequently visited by the public

Members of the public visit the building frequently as part of its normal operation.

Over 250 square metres

The building has a total useful floor area greater than 250 square metres.

Buildings close to the threshold, mixed-use premises and sites made up of several blocks should be considered individually. The requirement follows the building, its occupier and its use.

Most Schools and Academies Are Included

Department for Education guidance confirms that the requirement includes most schools and academies. For local authorities and academy trusts, the practical challenge is not one certificate. It is maintaining the right certificate and advisory report across every qualifying building, each with its own floor area, data and renewal date.

Actual Energy Use, Not Calculated Asset Performance

A DEC and an EPC answer different questions about a building.

Display Energy Certificate

Uses actual metered energy consumption over the relevant 12-month period to show operational performance.

Energy Performance Certificate

Uses a standardised model of the building fabric and installed services to show calculated asset performance.

The operational view responds to how the building is occupied and managed. It can reveal the effect of heating schedules, out-of-hours use, changing occupancy and practical operating decisions.

An A to G Rating That Must Be Displayed

The DEC shows operational energy performance on a scale from A to G, with A representing the best performance and G the worst. It also includes the operational rating figure used to benchmark the building against typical performance for its type.

A valid certificate must be displayed at all times in a prominent place that is clearly visible to members of the public, such as a reception area, entrance or foyer. The occupier must also have a valid advisory report in its possession or control.

Failing to display a valid certificate, or to hold a valid advisory report, carries fixed penalties of £500 and £1,000 respectively. Once renewals are managed centrally, staying compliant is straightforward.

Public building reception, where a Display Energy Certificate must be clearly displayed

The Advisory Report Is the Starting Point for Action

The certificate shows where the building currently sits. The advisory report identifies measures that may improve its energy performance, including operational changes, upgrades to building services and longer-term technology options.

The recommendations should be treated as a starting point for investigation. Before investment is approved, they should be tested against the building's actual operating pattern, technical constraints and measured consumption.

Current Validity Periods

Buildings over 1,000 square metres

The DEC is valid for 12 months. The accompanying advisory report is valid for 7 years.

Buildings over 250 and up to 1,000 square metres

The DEC and advisory report are both valid for 10 years.

A mixed estate may therefore contain annual and 10-year renewal cycles at the same time. Coordinating those dates centrally reduces the risk of certificates being overlooked. The government has said it will respond later in 2026 to consultation questions on when DECs are required and how long they last; the periods above apply until any change is made.

Delivered Through an Accredited DEC Assessor

Only an accredited and appropriately qualified energy assessor can produce and lodge a Display Energy Certificate and advisory report. The completed documents are lodged on the official register.

Unifi.id is not an accredited DEC assessor and does not issue certificates. We arrange and coordinate the assessment through an accredited assessor, help organise site information and energy records, manage the process across one or many buildings, track renewal dates and connect the findings to the wider energy programme.

Gathering site information and energy records for a DEC assessment
unifi.id

Unifi.id

Coordinates the process, data gathering, renewal programme and improvement follow-through.

Accredited DEC assessor

Reviews the building and energy information, produces the DEC and advisory report, and lodges the documents.

Connect the Certificate to Monitoring and Improvement

A DEC is built from metered consumption. Better energy information therefore supports both the certificate process and the decisions that follow it.

  • Bring annual energy records together before the assessment is due.

  • Use Energy Clamp Meters to understand selected circuits and fixed loads.

  • Use Smart Sockets to see and control plug-in equipment where appropriate.

  • Use TrackZero to connect operational data, actions and progress across the wider estate.

  • Use continued monitoring to assess whether an intervention changed consumption.

Energy-efficient public building with planted facades

Coordinate a Multi-Site Estate

A council, NHS body or academy trust may be managing the same requirement across dozens or hundreds of qualifying buildings. Unifi.id can help turn separate certificates and expiry dates into one coordinated programme.

  • Maintain a single view of certificate and advisory-report status.

  • Schedule renewals before certificates expire.

  • Coordinate assessments and information gathering across multiple sites.

  • Compare advisory reports to identify recurring issues and estate-wide opportunities.

  • Prioritise monitoring and investment where the evidence indicates the greatest need.

Estates team reviewing certificate renewals across a multi-site estate

Arrange a Display Energy Certificate

Tell us how many buildings are involved, their approximate floor areas and whether you need a first certificate, a renewal programme or support acting on advisory-report findings. We will explain the assessment route and how the operational evidence can support a wider programme of improvement.

This page provides general information about Display Energy Certificate requirements in England and Wales and is not legal advice. Requirements should be confirmed for the individual building. Different arrangements apply elsewhere in the UK. Requirements are under review and are expected to change during 2026. This page was last reviewed on 16 September 2026.